MS 245 Montinator Glue
Multi-purpose one-component adhesive glue, flexible and universal, for gluig thick and heavy panels on walls, floors and ceilings, ideal for:• Cork
• Wood materials
• Decorative Panels
• Wall coating
• Wooden slats
Packaging: 310 ml cartridge
Application: with a silicone-type gun by zigzagging and dotting the 4 corners of the panel. It is only applied on the panel and not on the substrate. For installation on plasterboard, a coat of primer must first be applied.
Consumption: 70 ml/m2 approx – 4,4 m2 for cartridge
Certifications: Class A+ very low emission of volatile air pollutants
- coatable after curing
- fast curing
- hardening in a humid environment
- easy processing
Base component: MS Polymer hybrid sealant
Cleaner: WAKOL RV 105 Neoprene thinner, before adhesive is cured.
Open time: 5 - 10 minutes
Curing time: 2.5 mm layer - 24 hours
Temperature resistance: -40 °C to +90 °C in hardened state
Application: with suitable cartridge syringe
Storage temperature: between +5 °C and +25 °C, protect from excessive heat
Storage duration: 12 months at room temperature
Identification according to hazardous substances regulation: see safety data sheet
The substrate and climatic conditions must comply with the requirements of the standards and information sheets. Substrates to be glued must be solid and resistant and free of dust, grease and oil. If necessary, sand beforehand.
Instructions for use
WAKOL MS 245 Montinator must be applied by forming strings on the substrates to be bonded, which must be joined within the open time
Particularly suitable for parquet, skirting boards, stair profiles, edges, footboards and for sealing joints.
WAKOL MS 245 Montinator must not be processed at temperatures below + 5 °C and above + 40 °C.
Due to the large number of paints on the market, preliminary tests are recommended.
The paint must be applied to the sealant within 4 hours.
No customer reviews for the moment.
(10 other products in the same category)